Diy - Engraved Wooden Eggs - Easter Decor

This post is sponsored past times The Home Depot.

The displays on the stores too pictures all unopen to social media drib dead on on reminding me that Easter is fast approaching. While I commonly don't larn overboard on Easter decor, I ever endeavor to do ane decor item to display on the mantel or a tablescape. This fourth dimension around, I spent a practiced sum of fourth dimension trying to catch a novel skill: Engraving.  The results are real amateur... but, the satisfaction of getting started is priceless!
*This post contains affiliate links.

If you're novel to rotary tools, permit me tell yous that a rotary tool is a handheld might tool amongst a rotary tip that accepts a diversity of attachments for dissimilar tasks... Grinding, etching, engraving, routing, cutting, sharpening, cleaning, etc.

Dremel 4300 Series Variable Speed Corded Rotary Tool Kit

I've had a Dremel rotary tool for a few years already, I constantly utilization it during my DIY projects unopen to the house, I telephone band it the "fix-it" tool, because I ever convey it out to larn me out of trouble... H5N1 molding that doesn't gibe quite nice, grout that needs to go, cleaning a modest location earlier gluing it, the Dremel is ever there. I exclusively demand to modify the chip according to the describe too it's practiced to go.

DREMEL EZ Lock
|  Sanding/Grinding Kit  |  Sanding/Polishing Kit  |  Cutting Kit  |

However, I had never used it for an fine art projection or to a greater extent than just for engraving similar i did here.
Well, getting the Dremel 32 in. Flex-Shaft Attachment was a practiced incentive. ;)
The Flex-shaft attachment easily attaches to virtually rotary tools too it gives yous lots to a greater extent than command too comfort piece working on a projection that requires yous to piece of job for extended periods of time. Your paw volition give thank yous you!

I made a holder post using 1/2" pipage too connectors to agree the rotary tool.

It worked similar a charm! It is a temporary solution that was clamped to the tabular array leg. H5N1 flooring flange on the bottom of the pipage gave it to a greater extent than stability.

Dremel 4300 Series  |  Milwaukee 500-Lumen Flashlight

I also brought upwards my Milwaukee flashlight. Great calorie-free is of import piece working on these projects. Being able to modify the calorie-free setting from overflowing to location was a summation too. And I honey the flashlight's magnet, it attaches to the pipage strongly!

Milwaukee 500-Lumen Flashlight

• 500 Lumen of truthful view
• 110° Pivoting caput amongst location too overflowing beam
• Impact, H2O too dust resistant
• Magnetic base of operations for hands-free use
• 3x faster accuse fourth dimension delivers 80% accuse inward nether ane hour
• Fuel guess allows fast checking of REDLITHIUM USB battery charge

Well, the start affair I did later having a dedicated working infinite was to practise my engraving moves on a spare slice of wood. You encounter that pattern I drew there? H5N1 picayune equally good optimistic! :D 

It was a modest pattern amongst equally good much detail. Needles to say, it didn't work.

Dremel 32 in. Flex-Shaft Attachment 

In the end, I went for an slow equally a pie design!  Dots too unproblematic lines. 😬
The round-ish shape of the eggs made things a chip to a greater extent than difficult, I had to agree the egg amongst ane paw piece engraving the designs amongst the other.

For the virtually business office of this projection I used the round-shape engraving cutter yous encounter inward the moving-picture demo below.

Dremel 1/16 in. Round-Shape Engraving Cutter

But, I tried many of the tips I had inward my stash, similar the ane yous encounter below for making the dots.

Practice is the best bet when trying to principal a novel skill. I definitely demand to invest many to a greater extent than hours inward guild to larn meliorate at engraving.

After giving the eggs a practiced sanding, they got ane coat of white paint.

After some to a greater extent than sanding to divulge some of the wooden tone, this is how they look.

I similar the texture the engraving gives to the shine surface of the eggs. However, the perfectionist inward me keeps on doing... 😝😝

Well my friends, that was my start engraving sense too it's definitely non the final one.
Are yous practiced at engraving? Any tips yous desire to give to this rookie? Let me know inward the comments department below. Thanks!

I admit that The Home Depot is partnering amongst me to participate inward the promotional plan described to a higher identify (the “Program”). As a business office of the Program, I am receiving compensation inward the shape of products too services, for the piece of job of promoting The Home Depot. All expressed opinions too experiences are my ain words. My post complies amongst the Word Of Mouth Marketing Association (WOMMA) Ethics Code too applicable Federal Trade Commission guidelines.

*This post contains affiliate links.

Enjoy what yous read today? Enter your electronic mail address below to subscribe to :


Delivered past times FeedBurner