Diy Wall Mountain Side Table
Hey all! I am Caitlin, of The Merrythought, in addition to I am thence excited to live on sharing a DIY alongside all of you lot hither on today! Lately I convey been working on updating my living room yesteryear decluttering in addition to adding or thence useful but uncomplicated DIY projects. This i mightiness merely live on my favorite thence far!
What you'll need:
-Two pieces of hardwood (I used oak) 14" x seven 1/4" x 3/4" in addition to 14" x 1 1/4" x 3/4"
-Two pocket-size pieces of plywood 2 3/8" x 1 7/8" x 3/16" in addition to seven 1/4" x 2 1/4" x 3/16"
-5 curt screws (1 5/8")
-1 long screw (2 1/2")
-Miterbox saw
-Drill
-Stain
-Super glue/Wood glue
How to brand it:
-Use your saw to cutting both ends of the long, sparse slice of oak (which volition live on the back upwardly underneath) at 45 bird angles.
-Stain all 4 pieces of forest in addition to allow them dry out according to the directions of your stain.
-Attach the larger slice of plywood to the dorsum of the tabular array yesteryear drilling 2 holes through the plywood large plenty for the screw to become through thence business it upwardly on the dorsum of the board in addition to drill 2 airplane pilot holes inwards the dorsum of the oak thence screw the 2 screws inwards identify through these holes.
-Drill 2 holes through that plywood underneath where it is attached to the oak - these volition live on where the screws become into the wall later.
-Use the mucilage to attach the smaller slice of plywood to the bottom of the angled forest thence drill a hole through both - where a screw volition become through into the wall later.
-Drill a hole through the tiptop of the angled slice that is slightly wider thence your screw in addition to attach it to the bottom of your tabular array yesteryear laying your table, alongside the tiptop on the flooring in addition to dorsum side (the plywood) against a wall, pump your back upwardly slice on the bottom of the tabular array tiptop alongside the plywood slice sitting apartment against the wall, thence attach alongside a curt screw.
-Now you lot tin purpose 2 curt screws through the large plywood to attach it to the wall in addition to the long screw to attach the bottom back upwardly to the wall. Make certain your tabular array is bird earlier screwing it in.
Mine has already gotten a lot of purpose belongings my drinks in addition to snacks since this corner of the couch is my favorite topographic point for belatedly nighttime blogging. Try it out. I promise you lot relish yours every bit much every bit I practise mine!
Caitlin is i of the 3 minds behind The Merrythought. There they portion alongside you lot yummy recipes, inspiring DIY projects, fashionable clothes, lovely homes, pretty parties, in addition to bits of their household unit of measurement life.
Follow her:
Blog: http://themerrythought.com
Facebook: http://facebook.com/TheMerrythought
Pinterest: http://pinterest.com/themerrythought/
Instagram: http://instagram.com/caitlinsheree
