How To Brand A Uncomplicated Industrial Metallic Snowflake

Simple Metal Industrial DIY Holiday door hanger tutorial How to Make a Simple Industrial Metal Snowflake

*This post service is sponsored by Simpson Strong-Tie ® and contains affiliate links. All opinions are my ain together with are uninfluenced.

Happy Holidays everyone! Did you lot all consume plenty turkey concluding week? I'm currently sitting on the couch eating pie together with working on my wintertime bod. Speaking of winter, I estimate it's fourth dimension to kickoff busting out the vacation decorations. I convey a whole page of 3D Plywood Trees. Today I'm sharing a SUPER slowly tutorial anyone tin arrive at notice create inward a unmarried afternoon. A HUGE industrial metallic snowflake door hanger, no especial tools required!

I've had the privilege this twelvemonth to endure a create ambassador for i of my favorite brands Simpson Strong-Tie. I teamed upwards amongst them again, using or together with thus of their cool structural straps to create or together with thus slowly vacation decor.

Check out my other projects I came upwards amongst using Simpson Strong-Tie products:

I establish all my materials at The Home Depot. If you lot convey whatever problem finding the Simpson Strong Tie strap, you lot tin arrive at notice check out my "Come Shop amongst Me" video where I arrive at a quick tour of my Home Depot together with exhibit or together with thus of my cloak-and-dagger tips. (Don't worry, I plough the photographic television set camera :)

Materials List:

(3) *Simpson Strong Tie ST6236 14-Gauge 33-13/16" Strap Tie
(12) *Simpson Strong Tie ST292 20-Gauge 9-5/16" Strap Tie
(6) *3/8" #6 car screws
(3) *1/2" #6 car screws
(12) *#6 dome nuts
*Framers Hanging Wire

1. Align the bottom correct corner holes of 2 brusk straps along the dorsum side of i of the long straps. Find the sixth hole from the terminate together with identify a 3/8" screw through all 3 layers. Twist a nut on the contrary side together with operate the screwdriver together with wrench to tighten everything together.

2. Repeat measurement i on the other terminate of the long strap, creating a section.

3. Place all 3 sections together, making certain to align 3 of the holes inward the center.

Attach sections together using 1/2" screws together with dome nuts.

4. To proceed the screw caput from scratching your door, stick a 1" adhesive felt pad side past times side to each screw.

The felt is slightly thicker than the screw heads together with volition allow the snowflake to slide across the door without issue.

5. The concluding measurement is to create a claw to hang the finished snowflake by. Cut a 10" length of framer's wire. Loop both ends through the terminate of i of the long straps together with twist the ends together.