Widget HTML Atas

Target Mirror Hack: Diy $18 Mirror


In my quest to"de-old-lady" my menage unit of measurement room, I decided to endeavour a projection I had been dreaming upward for a while. I saw this mirror online through Target together with savage inward love. I honey the traditional style, together with how it almost looks similar a recycled window.

 I decided to endeavour a projection I had been dreaming upward for a spell Target Mirror Hack: DIY $18 Mirror
source
  I wanted something a piddling larger, white together with wasn't nearly to pay $69.99. You know you're inexpensive when yous create upward one's postulate heed to knock-off something from Target! 

I started amongst 6, Dollar Store mirrors together with a slice of 1/4 inward plywood a had lying around. You tin brand this same mirror whatever size or configuration you'd like. I choose plans to brand a large, fifteen panel ane for my living room soon. You don't choose to purpose plywood. Any lightweight, potent surface, slightly larger than the mirrors pose together would work.


First, I had to clit the mirrors apart. They came inward a cheap, plastic frame that was tardily to clit apart, exposing precisely the drinking glass mirror. Then, starting fourth dimension yesteryear using a foursquare to depict a conduct line, horizontally across my plywood. 


I thus lined upward three mirrors across, amongst a strip of modest moulding betwixt them together with measured to teach my width. I thus cutting a slice of my modest cut back that length, centered it on my trouble together with glued it to the wood.


The moulding I used was nearly 5/8 inward broad together with similar to "half-round" but apartment on the top. You tin run across my "fancy clamping system" I used to concur the moulding downward spell it dried.

Next, starting on the correct border of my view moulding, I set downward a expert total of forest glue. I used forest mucilage because the mirrors I used were pretty lightweight together with honestly, it's what I had. It worked great! But side yesteryear side time, I computer program on using Liquid Nails, precisely to live safe. 


Then alternate, mirror, trim, mirror, trim, mirror, moving across the wood, keeping everything tight against the view moulding. 


Repeat the same procedure on the other side of the moulding together with "clamp" everything downward to dry.


After drying for several hours, it was fourth dimension to add together the casing to create a frame. Measuring was easy. I precisely held a slice of moulding upward to the border of the mirror together with using a pencil, ascribed a piddling score on the exterior edges, giving me my exact width. Then when I went to purpose my miter saw, I precisely used those marks equally my brusk call for together with cutting a 45 grade angle. 

Using to a greater extent than forest glue, I attached my frame together with weighed it downward amongst some to a greater extent than cans to allow dry.


I allow everything dry out over night. The side yesteryear side 24-hour interval I filled all my gaps amongst caulk. Notice the expanse where the pieces of modest moulding trouble up? Because of the curved edges, it left a ridge. 


I precisely filled together with smoothed the expanse amongst some caulk together with it blended the 2 pieces beautifully.


Next stair was to paint. I started yesteryear haphazardly brushing on some tan, latex pigment I had inward the garage.


Then I brushed on some silverish acrylic paint, randomly.


Lastly, I coated the entire frame together with cut back amongst ane coat of a creamy, white, latex paint.


I thus distresses the edges amongst some 100 grit sandpaper to convey through the other colors a bit.


I sealed everything amongst 2 coats of PAS together with I was done! 

I similar the hold back of it leaning on move yesteryear of the bookshelf, but I too bought some moving-picture exhibit hanging wire together with hooks inward illustration I create upward one's postulate heed to hang it on the wall sometime downward the road. 

What create yous think? It's large (approx. 2.5 ft x three ft ) together with the perfect agency to update my menage unit of measurement room. Not bad, for to a greater extent than or less $18!


Piece of 1/4in plywood = FREE (on hand)
6 Dollar Store mirrors = $6
12 ft of door casing @ $0.68/ft = $8.16
7 ft of modest cut back @ $0.54/ft = $3.78
Paint, caulk, mucilage = FREE (on hand)

TOTAL: $17.94



Linking at:

:
 I decided to endeavour a projection I had been dreaming upward for a spell Target Mirror Hack: DIY $18 Mirror


 I decided to endeavour a projection I had been dreaming upward for a spell Target Mirror Hack: DIY $18 Mirror



 I decided to endeavour a projection I had been dreaming upward for a spell Target Mirror Hack: DIY $18 Mirror

 I decided to endeavour a projection I had been dreaming upward for a spell Target Mirror Hack: DIY $18 Mirror I decided to endeavour a projection I had been dreaming upward for a spell Target Mirror Hack: DIY $18 Mirror I decided to endeavour a projection I had been dreaming upward for a spell Target Mirror Hack: DIY $18 Mirror I decided to endeavour a projection I had been dreaming upward for a spell Target Mirror Hack: DIY $18 Mirror I decided to endeavour a projection I had been dreaming upward for a spell Target Mirror Hack: DIY $18 Mirror